View PS2913-1_4213220.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOCOUPLER
PS2913-1
SINGLE Tr. OUTPUT, HIGH COLLECTOR TO EMITTER VOLTAGE 4-PIN ULTRA SMALL FLAT-LEAD -NEPOC Series- PHOTOCOUPLER
DESCRIPTION
The PS2913-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor in one package for high density mounting applications. An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30% compared with the PS28xx series.
FEATURES
* Ultra small flat-lead package (4.6 (L) x 2.5 (W) x 2.1 (H) mm) * Isolation distance (0.4 mm MIN.) * High collector to emitter voltage (VCEO = 120 V) * High isolation voltage (BV = 2 500 Vr.m.s.) * Ordering number of taping product: PS2913-1-F3, F4: 3 500 pcs/reel
APPLICATIONS
* Hybrid IC * Power supply
Document No. PN10043EJ02V0DS (2nd edition) Date Published November 2003 CP(K)
The mark
shows major revised points.
PS2913-1
PACKAGE DIMENSIONS (UNIT: mm)
TOP VIEW
4 3
2.50.3 4 3
N
1 2
4.1 MIN.
4.60.2
1. Anode 2. Cathode 3. Emitter 4. Collector
1
2
5.00.2
2.1 MAX.
0.40.1
0.15 +0.1 -0.05
0.20.1
1.27
MARKING
13
N
Last number of type No. : 13
An initial of "NEC"
111
No. 1 pin mark (knicked corner)
Assembly lot
1 11
Week assembled Year assembled
PHOTOCOUPLER CONSTRUCTION
Parameter Air Distance Creepage Distance Isolation Distance Unit (MIN.) 4 mm 4 mm 0.4 mm
2
Data Sheet PN10043EJ02V0DS
PS2913-1
ORDERING INFORMATION (Solder Contains Lead)
Part Number PS2913-1-F3 PS2913-1-F4 Package 4-pin ultra small flat-lead Packing Style Embossed Tape 3 500 pcs/reel Application Part Number PS2913-1
*1
*1 For the application of the Safety Standard, following part number should be used.
ORDERING INFORMATION (Pb-Free)
Part Number PS2913-1-F3-A PS2913-1-F4-A Package 4-pin ultra small flat-lead Packing Style Embossed Tape 3 500 pcs/reel Application Part Number PS2913-1
*1
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter Diode Forward Current Forward Current Derating Peak Forward Current Power Dissipation Reverse Voltage Transistor Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage
*2 *1
Symbol IF
Ratings 50 0.5 0.5 60 6 120 6 30 1.2 120 2 500 160 -55 to +100 -55 to +150
Unit mA mA/C A mW V V V mA mW/C mW Vr.m.s. mW C C
IF/C
IFP PD VR VCEO VECO IC
PC/C
PC BV PT TA Tstg
Total Power Dissipation Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output
Data Sheet PN10043EJ02V0DS
3
PS2913-1
ELECTRICAL CHARACTERISTICS (TA = 25C)
Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF)
*1
Symbol VF IR Ct ICEO IF = 1 mA VR = 5 V
Conditions
MIN. 0.9
TYP. 1.1
MAX. 1.3 5
Unit V
A
pF
V = 0 V, f = 1 MHz IF = 0 mA, VCE = 120 V
15 100
nA
CTR VCE (sat) RI-O CI-O tr tf ton
IF = 1 mA, VCE = 5 V IF = 1 mA, IC = 0.2 mA VI-O = 1 kVDC V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA, RL = 100
50
100 0.13
200 0.3
% V
Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time On Time
*2
10
11
0.4 10 10
pF
s
*2
*2 *2
VCC = 5 V, IF = 1 mA, RL = 5 k
80 5 50
s s s
Storage Time Off Time
*2
ts toff
*1 CTR rank N: K: L: M: 50 to 200 (%) 100 to 200 (%) 75 to 150 (%) 50 to 100 (%)
*2 Test circuit for switching time
Pulse Input PW = 100 s Duty cycle = 1/10
IF VCC
In monitor
50 RL = 100
VOUT
CAUTIONS REGARDING NOISE
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between correctoremitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
4
Data Sheet PN10043EJ02V0DS
PS2913-1
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
80 140 120 100 80 60 40 20 0 25 50 75 100 125
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
Maximum Forward Current IF (mA)
60
40 0.5 mA/C 20
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE
12 CTR = 100% IF = 5 mA 10 8 6 4 2 2 mA 1 mA 0.5 mA 2 4 6 8 10
10
TA = +100C +60C +25C
1 0C -25C -50C
0.1
0.01 0.0
Collector Current IC (mA)
2.0
Forward Current IF (mA)
0.5
1.0
1.5
0
Forward Voltage VF (V)
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current ICEO (nA)
50 000 10 000 5 000 1 000 500 100 50 10 5 1 0.5 0.1 -60 -40 -20 0 20 40 60 80 100 VCE = 40 V 24 V 10 V
COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE
10 CTR = 100% 5 mA 2 mA
Collector Current IC (mA)
1 mA 1 IF = 0.5 mA
0.1 0.0
0.2
0.4
0.6
0.8
1.0
Ambient Temperature TA (C)
Collector Saturation Voltage VCE(sat) (V)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10043EJ02V0DS
5
;; ;
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Ratio CTR
PS2913-1
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
1.4 1.2
300 250
Current Transfer Ratio CTR (%)
VCE = 5 V, n=3
Sample A B C
1.0 0.8
200
150 100
0.6
0.4
0.2
Normalized to 1.0 at TA = 25C, IF = 1 mA, VCE = 5 V
50 75
50
0.0 -50
-25
0
25
100
0 0.1
1
10
100
Ambient Temperature TA (C)
Forward Current IF (mA)
SWITCHING TIME vs. LOAD RESISTANCE
FREQUENCY RESPONSE
10 000
1.2 1.0 0.8 0.6 0.4 0.2
IF = 1 mA, VCC = 5 V, CTR = 120%
Switching Time t ( s)
Normalized Gain Gv
1 000
toff
100
ts
RL = 1 k 510 300 100
10
ton
1 1k
10k
100 k
1 000 k
0.0 0.5
1
5
10
50 100
500
Load Resistance RL ()
Frequency f (kHz)
LONG TERM CTR DEGRADATION
1.2 1.0
CTR (Relative Value)
0.8 0.6 0.4 0.2 0.0
IF = 1 mA, TA = 25C IF = 5 mA, TA = 25C IF = 20 mA, TA = 25C IF = 20 mA, TA = 60C
1
102
103
104
105
106
Time (Hr)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10043EJ02V0DS
PS2913-1
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.00.05
4.00.1
1.5+0.1 -0
1.750.1
2.9 MAX.
12.00.2 5.30.1
5.50.05
0.3
1.550.05
4.00.1
2.90.1
2.40.1
Tape Direction
PS2913-1-F3 PS2913-1-F4
N
N
N
N
N
N
N
N
Outline and Dimensions (Reel)
2.00.5
13.00.2
3302.0
1001.0
2.00.5
21.00.8
13.51.0
Packing: 3 500 pcs/reel
11.9 to 15.4 Outer edge of flange
Data Sheet PN10043EJ02V0DS
7
PS2913-1
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.27 0.6
(0.35) 4.14
0.8
4.7
5.7
( ) : Reference value
24-R0.1
Remark This drawing is considered to meet air and outer creepage distance 4.0 mm minimum. All dimensions in this figure must be evaluated before use.
8
Data Sheet PN10043EJ02V0DS
PS2913-1
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s
260C MAX. 220C
to 60 s
180C
120C
12030 s (preheating)
Time (s)
(2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
USAGE CAUTIONS
1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10043EJ02V0DS
9
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS2913-1

	To Download PS2913-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .